CyberPower P704URC1
CyberPower P704URC1
Overview
The CyberPower P704URC1 is a seven-outlet surge protector incorporating integrated USB charging ports for portable electronic devices.
The documented example was purchased new from Woot.com and documented prior to entering service. It serves as a modern reference example within the OldSurge Archive.
Unlike many historic surge protectors documented by the archive, the P704URC1 incorporates dedicated USB charging capability and a contemporary consumer-oriented design intended to support both AC-powered equipment and mobile devices.
Documented Example
- OldSurge ID: OS-0014
- Manufacturer: CyberPower
- Model: P704URC1
- Condition: New
- Acquisition Source: Woot.com
- Purchase Price: $14.99
Specifications
- Manufacturer: CyberPower
- Model: P704URC1
- Device Type: Surge Protector
- Outlets: 7 grounded outlets
- USB Charging Ports: 4 USB-A ports
- USB Output:
- 2.4 A shared per USB charging section
- Length: Approximately 12.56 in (31.9 cm)
- Width: Approximately 2.06 in (5.2 cm)
- Height:
- Approximately 1.25 in (3.2 cm) at the outlet section
- Approximately 1.63 in (4.1 cm) at the control section
- Power Cord Length: Approximately 4 ft (1.2 m)
- Outlets: 7 grounded outlets
- Transformer-Spaced Outlet: Yes
- USB Charging Output:
- Marked "2.4A USB" adjacent to each pair of USB charging ports
- Warranty: 1 year
- Country of Manufacture: Vietnam
- Voltage Rating: 125 VAC
- Current Rating: 15 A
- Frequency: 60 Hz
- USB Output: 5 VDC, 2.4 A
- Voltage Protection Rating (VPR):
- Line-to-Neutral (L-N): 600 V
- Line-to-Ground (L-G): 600 V
- Neutral-to-Ground (N-G): 600 V
- FCC ID: CM-KY
- Safety Certification: ETL Listed
- ETL Control Number: 3139160
- Markings: Sticker marked "10000501" present on underside near USB-port end.
- Power Cord Type: SJT
- Conductors: 14 AWG × 3
- Weight: TBD
Physical Description
The CyberPower P704URC1 utilizes a white plastic enclosure with seven grounded outlets arranged in a single row.
A recessed RESET rocker switch and separate PROTECTED and GROUNDED status indicators are located near the power-cord entry point.
The outlet nearest one end of the enclosure is transformer spaced, providing additional clearance for oversized power adapters and wall-wart style transformers.
Two pairs of USB-A charging ports are integrated directly into the enclosure, with one pair located at each end of the unit. Each charging section is marked "2.4A USB."
The enclosure measures approximately:
- Length: 12.56 in (31.9 cm)
- Width: 2.06 in (5.2 cm)
- Height:
- Approximately 1.25 in (3.2 cm) at the outlet section
- Approximately 1.63 in (4.1 cm) at the control section
The documented example utilizes a four-foot power cord and a right-angle attachment plug.
The attached power cord utilizes SJT construction with three 14 AWG conductors. A low-profile right-angle grounding attachment plug is fitted to the cord.
The documented example was received with a removable protective cap installed over the attachment plug blades.
Packaging
The documented example was purchased new from Woot.com.
The shipment arrived in the manufacturer's retail box without an additional outer carton or internal packing material. A shipping label was applied directly to the retail packaging.
The surge protector itself was loosely contained within the retail box without supplemental padding or protective wrapping.
Despite the minimal packaging, the documented example arrived without visible shipping damage.
The attachment plug was fitted with a removable protective cap when received. The cap protected the plug blades during shipment and retail handling.
Weight
Weight measurement pending.
Mounting Provisions
The underside incorporates two keyhole-style mounting slots.
The slot spacing supports horizontal wall or furniture mounting.
A reinforced central channel is molded into the underside of the enclosure between the mounting locations.
Product Gallery
-
Overall view of the CyberPower P704URC1. -
Center outlet section. -
USB charging ports and adjacent outlet section. -
Control section showing the RESET switch and status indicators. -
USB charging ports and transformer-spaced outlet. -
Cord-entry end showing the power-cord strain relief. -
Right-side profile view. -
Left-side profile view. -
Underside view showing mounting provisions, labels, and electrical information. -
Underside specifications, ratings, and regulatory markings. -
Center underside section showing mounting provisions. -
USB-port-end underside showing certification markings and inventory sticker. -
Right-angle grounding attachment plug. -
Power cord specifications and manufacturer markings. -
Protective cap supplied on the attachment plug.
Testing
Testing pending.
Design Notes
The P704URC1 utilizes a low-profile right-angle attachment plug intended to reduce clearance requirements behind furniture.
When connected to receptacles installed with the grounding contact in the upward position, the power cord exits upward from the receptacle rather than downward. Depending on the installation, this may reduce some of the cable-management advantages typically associated with right-angle plugs.
Service History
The documented example was photographed and documented prior to entering service.
The unit serves as a modern reference example within the OldSurge Archive.
Teardown
Teardown not currently planned.