Gemini Surge Model VG307

Overview

The Gemini Surge Model VG307 is a seven-outlet surge protector manufactured by Gemini.

The documented example features seven grounded outlets, a four-foot power cord, and a red rocker-style power switch. The unit is finished in a beige plastic enclosure typical of consumer surge protectors from the 1990s.

Specifications

Manufacturer: Gemini
Model: VG307
Device Type: Surge Protector
Outlets: 7 grounded outlets
Circuit Breaker: Resettable push-button type
Maximum Load: 15A, 120VAC, 60Hz
Maximum Suppression: 500V
UL File Number: E111219
CSA File Number: LR69225
Country of Origin: China
Mounting: Dual keyhole wall-mount slots
Power Cord Length: Approximately 4 ft (1.2 m)
Length: Approximately 12.25 in (31.1 cm)
Width: Approximately 2.19 in (5.6 cm)
Height: Approximately 1.25 in (3.2 cm)

Physical Description

The VG307 utilizes a rectangular beige plastic housing with seven grounded outlets arranged in a single row.

A red rocker-style power switch is located near the cord entry point. The switch does not illuminate on the documented example, although its design resembles an illuminated rocker switch commonly found on surge protectors of the period. The switch motion is perpendicular to the row of outlets.

The VG307 provides seven grounded outlets arranged in a single row. A resettable circuit breaker is located adjacent to the power-cord entry point.

The documented example measures approximately:

Length: 12.25 in (31.1 cm)
Width: 2.19 in (5.6 cm)
Height: 1.25 in (3.2 cm)

The attached power cord measures approximately 4 ft (1.2 m) in length.

The VG307 utilizes a long, low-profile enclosure with rounded end caps and a single row of seven grounded outlets.

The housing is supported by molded feet that elevate the enclosure slightly above the mounting surface.

The documented example is finished in beige plastic and incorporates a large red rocker-style power switch located near the power-cord entry point.

The underside of the enclosure incorporates two keyhole-shaped wall-mount slots for permanent installation beneath desks, benches, or shelving - with slots supporting mounting in the vertical or horizontal position.

Four molded support feet elevate the enclosure slightly above the mounting surface and help stabilize the unit when placed on a flat surface.

The housing is assembled using multiple screws, permitting non-destructive disassembly.

Operational Notes

The documented example powers connected devices normally.

The unit incorporates a red rocker-style power switch. While the switch resembles an illuminated rocker switch, no illumination is present on the documented example during operation.