Model No. 2371, 0728, 2174 Relocatable Power Tap
This relocatable power tap is identified by the embossed markings "Model No. 2371, 0728, 2174" on the underside of the enclosure. No manufacturer or retail brand has been positively identified. The unit is documented in the OldSurge Archive under the Generic category.
Overview
| Brand | Unknown / Unbranded |
|---|---|
| Product Category | Generic / Unbranded |
| Model Number | 2371, 0728, 2174 |
| Product Type | Relocatable Power Tap |
| AC Outlets | 6 |
| Electrical Rating | 15A, 125VAC, 60Hz |
| Country of Manufacture | China |
| UL File | E89769 |
| CSA File | LR80823 |
Photographs
-
Overall view with attached power cord and resettable circuit breaker / power switch. -
Resettable circuit breaker / power switch and cord entry detail. -
Close-up view of outlet configuration and condition. -
Outlet detail showing condition and wear from long-term service. -
Side profile showing enclosure shape, support feet, and cord-entry end. -
Side profile showing enclosure construction, support feet, and housing seam. -
End view showing enclosure construction and housing profile. -
Underside showing labels, wall-mount keyhole slots, and enclosure hardware. -
Close-up of manufacturer markings, certifications, and model information. -
Model identification, safety markings, and wall-mount keyhole slot. -
Certification markings, UL hologram, and B10C-A label. -
Cord-entry end and enclosure hardware. -
Grounded NEMA 5-15P plug attached to the power cord. -
Plug markings showing CWCO manufacturer information and certification identifiers. -
Power cord markings showing UL file number, wire size, and ratings. -
CSA certification and construction markings on the power cord. -
Condition upon retrieval prior to cleaning and documentation. -
Outlet tester indicating correct wiring and grounding. -
Documented weight of approximately 10.5 oz (298 g) including attached power cord.
Specifications
- Device Type: Relocatable Power Tap
- Brand: Unknown / Unbranded
- Model Number: 2371, 0728, 2174
- Country of Manufacture: China
- Outlets: 6 grounded outlets
- Electrical Rating: 125 VAC, 15 A, 60 Hz
- UL File Number (Product): E89769
- CSA File Number (Product): LR80823
- Power Cord:
- Length: Approximately 3 ft (0.9 m)
- Type: SJT
- Conductors: 3
- Wire Size: 14 AWG
- UL Temperature Rating: 75°C
- CSA Temperature Rating: 60°C
- Flame Ratings: VW-1 (UL), FT2 (CSA)
- Manufacturer: CWCO
- UL File Number: E55178
- CSA File Number: LL40876
- Plug Type: NEMA 5-15P
- Manufacturer: CWCO
- Model: CWI-03
- UL File Number: E168486
- Mounting Method: Two offset keyhole slots
- Resettable Circuit Breaker: Yes
- Power Switch: Integrated with circuit breaker
- Weight: Approximately 10.5 oz (298 g)
Physical Description
The relocatable power tap utilizes an ivory-colored plastic enclosure containing six grounded NEMA 5-15R outlets arranged in a single row. A combination RESET/OFF circuit-breaker switch is positioned adjacent to the power-cord entry.
The attached power cord utilizes CWCO-manufactured SJT cable marked UL file number E55178 and CSA file number LL40876. Cord markings identify the assembly as a three-conductor 14 AWG cable carrying a VW-1 flame rating under UL standards and an FT2 rating under CSA standards. The cord is additionally marked for 75°C operation under UL standards and 60°C operation under CSA standards.
The power cord terminates in a molded NEMA 5-15P grounding plug marked CWCO and CWI-03. Plug markings include UL file number E168486.
The underside incorporates two offset keyhole-style mounting slots for wall installation together with certification markings, model information, and a UL hologram.
Date Codes
No explicit manufacturing date code has been identified.
Visible markings include:
- T151
- B10C-A
- UL hologram marked "09/2M"
- USA PAT.
The significance of these markings has not been confirmed.
Functional Testing
The documented example was tested for basic electrical operation and wiring integrity. Testing with a receptacle tester confirmed correct outlet wiring and grounding, and the integrated RESET/OFF circuit-breaker switch remained operational throughout testing.
Condition Upon Acquisition
This example exhibits cosmetic wear consistent with long-term service and storage. Dirt accumulation, minor discoloration, scuffs, scratches, and outlet wear were visible prior to cleaning. No evidence of melting, cracking, deformation, or significant physical damage was observed during documentation.
Teardown
Disassembly began in 2026 following retirement from service. Opening the enclosure required removal of six enclosure screws securing the upper and lower housing halves.
Interior examination revealed a straightforward construction consisting of full-length brass outlet contact strips, a resettable circuit breaker / power switch assembly, three-conductor wiring, molded outlet supports, and an integrated strain-relief system.
Unlike a surge protector, no surge suppression components, printed circuit boards, MOVs, filtering components, telephone protection circuitry, or coaxial protection circuitry were observed.
-
Six enclosure screws removed during disassembly. -
Initial internal view following removal of the enclosure cover. -
Brass contact strip construction and molded outlet supports. -
Cord termination, grounding conductor, and circuit breaker assembly. -
Power cord strain relief and cord-entry construction.
Notes
- The unit is classified as a Relocatable Power Tap rather than a surge protector.
- No manufacturer or retail brand has been positively identified.
- Alternate markings observed on the unit include B10C-A and T151.
- Construction uses full-length brass contact strips and a 14 AWG power cord.
- Similar examples have been observed on the secondary market with identical markings.
- The underside of the enclosure includes two keyhole mounting slots for wall installation.
- Six screws secure the upper and lower enclosure halves.
- Certification markings include UL file E89769 and CSA file LR80823.
- The underside of the enclosure includes the molded marking "USA PAT."
- The attached molded grounded plug is marked CWI-03 and CWCO and carries UL file number E168486.
- The plug includes CSA certification markings and utilizes a grounded NEMA 5-15P configuration.
- The attached power cord is marked CWCO and is constructed using 14 AWG three-conductor SJT cable.
- Cord markings indicate a 75°C rating under UL standards and a 60°C rating under CSA standards.
- The unit was cleaned prior to detailed photographic documentation.
- Functional testing using a receptacle tester indicated correct outlet wiring and grounding.
- Documented weight is approximately 10.5 oz (298 g) including the attached power cord.
- The relatively low weight reflects the unit's simple construction consisting primarily of a plastic enclosure, brass contact strips, resettable circuit breaker assembly, and three-conductor power cord.
- Unlike surge protectors, no MOVs, filtering inductors, printed circuit boards, telephone protection circuitry, or coaxial protection components are present.
Documented Example
- OldSurge ID: OS-0006