Model No. 2371, 0728, 2174 Relocatable Power Tap
Model No. 2371, 0728, 2174 Relocatable Power Tap
This relocatable power tap is identified by the embossed markings "Model No. 2371, 0728, 2174" on the underside of the enclosure. No manufacturer or retail brand has been positively identified. The unit is documented in the OldSurge Archive under the Generic category.
Overview
| Brand | Unknown |
|---|---|
| Product Category | Generic / Unbranded |
| Model Number | 2371, 0728, 2174 |
| Product Type | Relocatable Power Tap |
| AC Outlets | 6 |
| Electrical Rating | 15A, 125VAC, 60Hz |
| Country of Manufacture | China |
| UL File | E89769 |
| CSA File | LR80823 |
Photographs
-
Overall view with attached power cord and resettable circuit breaker / power switch. -
Resettable circuit breaker / power switch and cord entry detail. -
Close-up view of outlet configuration and condition. -
Outlet detail showing condition and wear from long-term service. -
Side profile showing enclosure shape, support feet, and cord-entry end. -
Side profile showing enclosure construction, support feet, and housing seam. -
End view showing enclosure construction and housing profile. -
Underside showing labels, wall-mount keyhole slots, and enclosure hardware. -
Close-up of manufacturer markings, certifications, and model information. -
Model identification, safety markings, and wall-mount keyhole slot. -
Certification markings, UL hologram, and B10C-A label. -
Cord-entry end and enclosure hardware. -
Grounded NEMA 5-15P plug attached to the power cord. -
Plug markings showing CWCO manufacturer information and certification identifiers. -
Power cord markings showing UL file number, wire size, and ratings. -
CSA certification and construction markings on the power cord. -
Condition upon retrieval prior to cleaning and documentation. -
Outlet tester indicating correct wiring and grounding.
Specifications
- Color: Ivory / Off-white
- AC outlets: 6
- Electrical rating: 15A, 125VAC, 60Hz
- Product classification: Relocatable Power Tap (RPT)
- Resettable circuit breaker: Yes
- Power switch: Integrated with circuit breaker
- Wall-mountable: Yes
- Mounting method: Two Offset Keyhole slots
- Country of manufacture: China
- UL file: E89769
- CSA file: LR80823
Physical Characteristics
- Housing material: Plastic
- Outlet type: NEMA 5-15R
- Plug type: NEMA 5-15P
- Cord type: SJT
- Cord size: 14 AWG × 3 conductors
- Cord Length: About 3 feet
- UL cord file: E55178
- CSA cord file: LL40876
- Cord/plug marking: CWCO
- UL temperature rating: 75°C
- CSA temperature rating: 60°C
- Flame rating: VW-1 / FT2
- Wall Mountable - two offset keyhole slots
- Housing construction: Two-piece plastic enclosure
- Plug type: Grounded NEMA 5-15P
- Plug construction: Molded
- Plug marking: CWI-03
- Plug manufacturer marking: CWCO
- Plug UL file: E168486
Date Codes
No explicit manufacturing date code has been identified.
Visible markings include:
- T151
- B10C-A
- UL hologram marked "09/2M"
- USA PAT.
The significance of these markings has not been confirmed.
Functional Testing
A receptacle tester was connected to one of the outlets during archival documentation. The tester indicated correct wiring and grounding on the tested outlet.
The resettable circuit breaker / power switch remained operational at the time of testing.
Condition
This example exhibits cosmetic wear consistent with long-term service and storage. Dirt accumulation, minor discoloration, scuffs, scratches, and outlet wear were visible prior to cleaning. No evidence of melting, cracking, deformation, or significant physical damage was observed during documentation.
Construction
Unlike a surge protector, this unit contains no surge suppression circuitry. Interior construction consists primarily of brass outlet contact strips, a resettable circuit breaker / power switch, internal wiring, and a six-outlet receptacle assembly. The enclosure utilizes a two-piece plastic housing with a textured finish and integrated support feet.
Teardown
Teardown
Disassembly began in 2026 following retirement from service. Opening the enclosure required removal of six enclosure screws securing the upper and lower housing halves.
Interior examination revealed a simple construction consisting of brass outlet contact strips, a resettable circuit breaker / switch assembly, three-conductor wiring, and molded plastic outlet supports. No surge suppression components, printed circuit boards, filtering components, or communications protection circuitry were observed.
-
Six enclosure screws removed during disassembly. -
Initial internal view following removal of the enclosure cover.
Notes
- The unit is classified as a Relocatable Power Tap rather than a surge protector.
- No manufacturer or retail brand has been positively identified.
- Alternate markings observed on the unit include B10C-A and T151.
- Construction uses full-length brass contact strips and a 14 AWG power cord.
- Similar examples have been observed on the secondary market with identical markings.
- The underside of the enclosure includes two keyhole mounting slots for wall installation.
- Six screws secure the upper and lower enclosure halves.
- Certification markings include UL file E89769 and CSA file LR80823.
- The underside of the enclosure includes the molded marking "USA PAT."
- The attached molded plug is marked CWI-03 and CWCO.
- The plug includes CSA certification markings and UL file number E168486.
- The plug utilizes a grounded NEMA 5-15P configuration.
- The attached power cord is marked CWCO and is constructed using 14 AWG three-conductor SJT cable.
- Cord markings indicate a 75°C rating under UL standards and a 60°C rating under CSA standards.
- The molded grounded plug is marked CWI-03 and carries UL file number E168486.
- The unit was cleaned prior to detailed photographic documentation.
- Functional testing using a receptacle tester indicated correct outlet wiring and grounding.