Gemini Surge Model VG307

Overview

The Gemini Surge Model VG307 is a seven-outlet surge protector manufactured by Gemini.

The documented example features seven grounded outlets, a four-foot power cord, and a red rocker-style power switch. The unit is finished in a beige plastic enclosure typical of consumer surge protectors from the 1990s.

Specifications

Manufacturer: Gemini
Model: VG307
Device Type: Surge Protector
Outlets: 7 grounded outlets
Maximum Load: 15A, 120VAC, 60Hz
Maximum Suppression: 500V
Power Cord Length: Approximately 4 ft (1.2 m)
Power Cord Type: SJT
Conductors: 16 AWG × 3
Cord Temperature Rating: 75°C
Length: Approximately 12.25 in (31.1 cm)
Width: Approximately 2.19 in (5.6 cm)
Height: Approximately 1.25 in (3.2 cm)
Country of Origin: China
UL File Number: E111219
CSA File Number: LR69225

Physical Description

The VG307 utilizes a rectangular beige plastic housing with seven grounded outlets arranged in a single row.

A red rocker-style power switch is located near the cord entry point. The switch does not illuminate on the documented example, although its design resembles an illuminated rocker switch commonly found on surge protectors of the period. The switch motion is perpendicular to the row of outlets.

The VG307 provides seven grounded outlets arranged in a single row. A resettable circuit breaker is located adjacent to the power-cord entry point.

The documented example measures approximately:

Length: 12.25 in (31.1 cm)
Width: 2.19 in (5.6 cm)
Height: 1.25 in (3.2 cm)

The attached power cord measures approximately 4 feet (1.2 m) in length and utilizes an SJT-rated jacket with three 16 AWG conductors. Cord markings indicate a 75°C temperature rating and identify the cord manufacturer as Rhythm.

The VG307 utilizes a long, low-profile enclosure with rounded end caps and a single row of seven grounded outlets.

The VG307 utilizes a grounded three-prong molded attachment plug permanently affixed to the four-foot power cord.

The housing is supported by molded feet that elevate the enclosure slightly above the mounting surface.

The documented example is finished in beige plastic and incorporates a large red rocker-style power switch located near the power-cord entry point.

The VG307 incorporates two keyhole mounting slots on the underside of the enclosure. The slot design supports installation in either horizontal or vertical orientations, providing flexibility for wall, desk, or cabinet mounting.

The attached power cord bears markings identifying it as an SJT-type cord utilizing three 16 AWG conductors with a 75°C temperature rating.

The molded support feet serve a dual purpose: elevating the enclosure slightly above the mounting surface and stabilizing the unit to prevent rocking when placed on a flat surface.

The housing is assembled using multiple screws, permitting non-destructive disassembly.

Mounting Provisions

The VG307 incorporates two keyhole mounting slots on the underside of the enclosure. The slot design supports installation in either horizontal or vertical orientations, providing flexibility for wall, desk, or cabinet mounting.

Operational Notes

The documented example powers connected devices normally.

The unit incorporates a red rocker-style power switch. While the switch resembles an illuminated rocker switch, no illumination is present on the documented example during operation.

Condition Upon Acquisition

The documented example was acquired as part of a collection of surplus electronic equipment and showed accumulated dust, dirt, and cosmetic wear consistent with long-term use.

The unit was cleaned prior to detailed documentation and photography.