Radio Shack 61-2140 Appliance Surge Protector

Radio Shack 61-2140 Appliance Surge Protector

Radio Shack 61-2140 Appliance Surge Protector.

Overview

The Radio Shack 61-2140 Appliance Surge Protector is a single-outlet surge protector marketed for appliance and consumer-electronics applications.

The documented example was manufactured in Mexico and represents the first Radio Shack–branded surge protector documented by the OldSurge Archive.

Unlike most surge protectors documented by the archive, the documented example was found to be non-functional during testing and did not pass utility power to a connected load.

Documented Example

• OldSurge ID: OS-0016
• Manufacturer: Radio Shack
• Model: 61-2140
• Country of Origin: Mexico

Specifications

• Manufacturer: Radio Shack
• Model: 61-2140
• Device Type: Appliance Surge Protector
• Outlets: 1
• Country of Final Assembly: Mexico
• Outlets: 6 grounded outlets
• Power Cord Length: Approximately 4 ft (1.2 m)
• Manufacturer: Radio Shack
• Model: 61-2140
• Country of Origin: Assembled in Mexico
• Outlets: 6 grounded outlets

• Length:
  • Approximately 10.38 in (26.4 cm)

• Width:
  • Approximately 2.0 in (5.1 cm) at the switch section
  • Approximately 1.75 in (4.4 cm) at the outlet section

• Height:
  • Approximately 1.0 in (2.5 cm)

• Power Cord Length: Approximately 4 ft (1.2 m)

• Electrical Rating: 120 VAC, 15 A, 60 Hz
• Surge Suppression Rating: 449 joules

``

Weight

The documented example weighs approximately 12.4 oz (352 g).

The relatively low weight is consistent with the device's compact dimensions, four-foot power cord, and comparatively simple construction.

Radio Shack 61-2140 on a digital scale.

Physical Description

The Radio Shack 61-2140 utilizes a relatively simple enclosure consisting of a six-outlet receptacle section and a combined rocker-switch and control section.

All six outlets are arranged in a standard receptacle orientation and are spaced evenly along the length of the device.

Unlike several higher-end surge protectors documented elsewhere in the archive, the 61-2140 does not incorporate transformer-spaced outlets, rotated receptacle orientations, telephone-line protection, coaxial protection, or diagnostic indicators.

Unlike some surge protectors intended for computer equipment, the six outlets are closely spaced and do not accommodate large transformer-style power adapters without blocking adjacent receptacles.

The Radio Shack 61-2140 utilizes a narrow rectangular enclosure with a widened control section incorporating a rocker switch.

The six outlets are arranged in a standard receptacle orientation and are positioned with relatively little spacing between adjacent outlets. The design does not provide dedicated transformer-spaced outlets for large plug-in power adapters.

The enclosure is notably compact and low in profile, measuring approximately 10.38 inches (26.4 cm) in length while standing only about 1 inch (2.5 cm) tall.

The underside incorporates four keyhole-style mounting slots that support wall or surface mounting.

The design utilizes a separate resettable circuit breaker located at the cord-entry end of the device.

At 12.4 oz (352 g), the Radio Shack 61-2140 is among the lighter surge protectors documented by the OldSurge Archive.

Product Gallery

• 
  Overall view of the documented Radio Shack 61-2140 surge protector.
• 
  Radio Shack branding and illuminated rocker-switch section.
• 
  Outlet section showing six grounded receptacles arranged in a standard receptacle orientation.
• 
  Left-side profile view.
• 
  Right-side profile view.
• 
  Outlet-end profile showing the six-outlet arrangement.
• 
  Cord-entry end showing the resettable circuit breaker and power-cord strain relief.
• 
  Underside view showing labels, mounting slots, enclosure fasteners, and attached power cord.
• 
  Product information label identifying the Radio Shack 61-2140 Appliance Surge Protector and its electrical ratings.
• 
  Switch-end underside detail showing mounting provisions and enclosure construction.

Testing

The documented example was tested for basic electrical operation.

During testing, no output voltage was present at the protected receptacle, and utility power was not passed to a connected load.

No additional troubleshooting was performed to determine the specific cause of the failure.

The documented example is therefore considered non-functional as documented.

Condition Upon Acquisition

The documented example was acquired for preservation and documentation by the OldSurge Archive.

The enclosure exhibited light dust accumulation, minor cosmetic wear, and moderate discoloration of the attached power cord consistent with age and prior use.

No significant cracking, melting, or external physical damage was observed.

The unit was cleaned prior to detailed documentation and photography.

Documented example prior to cleaning and photography.

Teardown

Teardown documentation pending.

Notable Characteristics

• First Radio Shack–branded surge protector documented by the OldSurge Archive
• First documented artifact manufactured in Mexico
• Single-outlet appliance surge-protector design
• Non-functional upon testing

Related Articles

• Radio Shack
• Surge Protectors
• Collection Index
• OldSurge Accession Register