Gemini Surge Model VG307

Gemini Surge Model VG307

Overall view of the Gemini Surge Model VG307.

Overview

The Gemini Surge Model VG307 is a seven-outlet surge protector manufactured by Gemini.

The documented example features seven grounded outlets, a four-foot power cord, and a red rocker-style power switch. The unit is finished in a beige plastic enclosure typical of consumer surge protectors from the 1990s.

Specifications

• Manufacturer: Gemini
• Model: VG307
• Device Type: Surge Protector
• Outlets: 7 grounded outlets
• Circuit Breaker: Resettable push-button type
• Maximum Load: 15A, 120VAC, 60Hz
• Maximum Suppression: 500V
• UL File Number: E111219
• CSA File Number: LR69225
• Country of Origin: China
• Mounting: Dual keyhole wall-mount slots
• Power Cord Length: Approximately 4 ft (1.2 m)
• Length: Approximately 12.25 in (31.1 cm)
• Width: Approximately 2.19 in (5.6 cm)
• Height: Approximately 1.25 in (3.2 cm)

Physical Description

The VG307 utilizes a rectangular beige plastic housing with seven grounded outlets arranged in a single row.

A red rocker-style power switch is located near the cord entry point. The switch does not illuminate on the documented example, although its design resembles an illuminated rocker switch commonly found on surge protectors of the period. The switch motion is perpendicular to the row of outlets.

The VG307 provides seven grounded outlets arranged in a single row. A resettable circuit breaker is located adjacent to the power-cord entry point.

The documented example measures approximately:

• Length: 12.25 in (31.1 cm)
• Width: 2.19 in (5.6 cm)
• Height: 1.25 in (3.2 cm)

The attached power cord measures approximately 4 ft (1.2 m) in length.

The VG307 utilizes a long, low-profile enclosure with rounded end caps and a single row of seven grounded outlets.

The housing is supported by molded feet that elevate the enclosure slightly above the mounting surface.

The documented example is finished in beige plastic and incorporates a large red rocker-style power switch located near the power-cord entry point.

The underside of the enclosure incorporates two keyhole-shaped wall-mount slots for permanent installation beneath desks, benches, or shelving - with slots supporting mounting in the vertical or horizontal position.

Four molded support feet elevate the enclosure slightly above the mounting surface and help stabilize the unit when placed on a flat surface.

The housing is assembled using multiple screws, permitting non-destructive disassembly.

Operational Notes

The documented example powers connected devices normally.

The unit incorporates a red rocker-style power switch. While the switch resembles an illuminated rocker switch, no illumination is present on the documented example during operation.

Product Gallery

• 
  Overall view of the Gemini Surge Model VG307.
• 
  Gemini Surge branding and power switch.
• 
  Close-up of the rocker power switch.
• 
  Oblique view showing the outlet arrangement and switch location.
• 
  Side profile of the Gemini Surge Model VG307.
• 
  Center outlet section.
• 
  Outlet detail near the end of the surge protector.
• 
  Power cord entry and resettable circuit breaker.
• 
  End view of the enclosure.
• 
  Bottom view of the VG307.
• 
  Cord-entry end showing wall-mount provisions.
• 
  Underside product information panel.