Yun YY-6CS: Difference between revisions

From OldSurge.com
Jump to navigation Jump to search
← Older edit

PowerPig (talk | contribs)

2,022 edits
PowerPig (talk | contribs)
2,022 edits
No edit summary
PowerPig (talk | contribs)
2,022 edits
No edit summary
 
(3 intermediate revisions by the same user not shown)
Line 1: Line 1:
= Yun YY-6CS =
[[File:surge_yun_yy-6cs_main_01.jpg|thumb|center|400px|Overall view of the Yun YY-6CS.]]
== Overview ==
The '''Yun YY-6CS''' is a six-outlet surge protector manufactured in July 2006.
The '''Yun YY-6CS''' is a six-outlet surge protector manufactured in July 2006.


Line 10: Line 4:


Inspection prior to documentation revealed significant dirt accumulation, a discolored power plug, and heat damage surrounding one outlet.
Inspection prior to documentation revealed significant dirt accumulation, a discolored power plug, and heat damage surrounding one outlet.
[[File:surge_yun_yy-6cs_main_01.jpg|thumb|center|400px|Overall view of the Yun YY-6CS.]]


== Documented Example ==
== Documented Example ==
Line 29: Line 25:
** Approximately 2.0 in (5.1 cm) at the control section
** Approximately 2.0 in (5.1 cm) at the control section
** Approximately 1.75 in (4.4 cm) at the outlet section
** Approximately 1.75 in (4.4 cm) at the outlet section
* Power Cord Length: Approximately 28 in (71 cm)
* Power Cord:
* Conductors: 14 AWG × 3
** Length: Approximately 28 in (71 cm)
* Flame Rating: VW-1
** Type: SJT
* UL File Number (Cord): E247978
** Conductors: 3
** Wire Size: 14 AWG
** Temperature Rating: 60°C
** Flame Rating: VW-1 / FT1
** Manufacturer: QIAOPU
** UL File Number: E247978
* Voltage Rating: 125 VAC
* Voltage Rating: 125 VAC
* Current Rating: 15 A
* Current Rating: 15 A
Line 40: Line 41:
* Country of Manufacture: China
* Country of Manufacture: China
* UL File Number: E225774
* UL File Number: E225774
* Power Cord Type: SJT (likely, pending additional markings)
* Power Cord Type: SJT


== Mounting Provisions ==
== Physical Description ==


The YY-6CS incorporates two keyhole-style mounting slots on the underside of the enclosure.
The YY-6CS utilizes a beige plastic enclosure with six grounded outlets arranged in a single row.


The slot arrangement supports mounting in either horizontal or vertical orientations.
An illuminated red rocker-style power switch is located near the power-cord entry point and is accompanied by bilingual surge-protection labeling.


== Condition Notes ==
The enclosure measures approximately:


The documented example exhibits substantial dirt accumulation, a flickering illuminated rocker switch, a discolored attachment plug, and significant heat damage surrounding one outlet near the end opposite the power-cord entry.
* Length: 10.125 in (25.7 cm)
* Width:
** Approximately 2.0 in (5.1 cm) at the control section
** Approximately 1.75 in (4.4 cm) at the outlet section
* Cord Length: Approximately 28 in (71 cm)


The damaged outlet contains transferred lettering from a previously connected attachment plug. The cause of the heating event is unknown; however, the damage is consistent with prolonged heating at the plug-to-receptacle interface.
The printed surge-protection labeling above the rocker switch exhibits noticeable wear and smearing. Some of the lettering was further disturbed during cleaning of the documented example.


The most severe damage is concentrated around the neutral blade opening of the affected receptacle. This suggests that heating may have originated at the plug-to-receptacle interface rather than within the connected appliance itself. The exact cause could not be conclusively determined, although deterioration of the contact connection is considered a possible contributing factor.
One outlet near the end opposite the power-cord entry exhibits significant heat damage and plastic deformation. The affected area includes visible transfer of molded lettering from a previously connected attachment plug, indicating that elevated temperatures were sufficient to soften the surrounding plastic.


The outlet exhibiting heat damage was not the outlet used by the space heater during the final documented period of service, indicating that the damage likely occurred earlier in the unit's operational life.
The underside incorporates a molded production date wheel indicating manufacture during July 2006.
The attached power cord utilizes QIADPU-manufactured SJT cable marked UL file number E247978. Cord markings identify the assembly as a three-conductor 14 AWG cable carrying VW-1 and FT1 flame ratings together with a 60°C temperature rating.


The damaged receptacle exhibits transferred lettering from a previously connected attachment plug. The softened plastic surrounding the outlet preserved portions of the plug's molded markings, indicating that temperatures became sufficiently high to deform the outlet face.
The power cord terminates in a molded grounded attachment plug. The plug exhibits significant discoloration and thermal damage consistent with long-term service.


The exact appliance responsible for the heating event is unknown.
The YY-6CS uses a screw-fastened enclosure and incorporates underside mounting slots for wall or furniture installation.


The enclosure exhibits accumulated wear consistent with long-term use. Despite evidence of significant heating around one outlet, no corresponding deformation or damage is visible on the underside of the enclosure.
A UL hologram affixed to the underside identifies the unit as a listed relocatable power tap.


The attachment plug exhibits significant heat discoloration and oxidation near the neutral blade. Similar heating damage is present on one outlet of the surge protector, suggesting that elevated temperatures occurred at multiple connection points during the unit's service life.
== Mounting Provisions ==


The attachment plug exhibits severe heat discoloration and oxidation concentrated around one blade. Green corrosion products and dark thermal staining are visible on the plug body.
The YY-6CS incorporates two keyhole-style mounting slots on the underside of the enclosure.


Combined with the heat damage observed at one receptacle, the evidence suggests that the YY-6CS experienced significant thermal stress during its service life.
The slot arrangement supports mounting in either horizontal or vertical orientations.


The damaged receptacle and damaged plug are not located at opposite ends of the same connection, indicating that more than one connection point may have experienced elevated temperatures over time.
== Weight ==


The attachment plug exhibits severe heat discoloration and oxidation concentrated around one blade. Green corrosion products and dark thermal staining are visible on the plug body.
The documented example weighs approximately 10.6 oz (300 g).


Combined with the melted receptacle documented elsewhere on the unit, the damage suggests that the YY-6CS experienced significant thermal stress during its service life.
[[File:surge_yun_yy-6cs_weight_01.jpg|center|600px|Yun YY-6CS on a digital scale.]]


The presence of transferred plug markings in the damaged receptacle and oxidation at the attachment plug indicates that elevated temperatures may have occurred at multiple electrical connection points over time.
== Condition Upon Acquisition ==


The documented example exhibits substantial dirt accumulation, a flickering illuminated rocker switch, a discolored attachment plug, and significant heat damage surrounding one outlet near the end opposite the power-cord entry.


== Physical Description ==
The damaged receptacle contains transferred lettering from a previously connected attachment plug. The softened plastic surrounding the outlet preserved portions of the plug's molded markings, indicating that temperatures became sufficiently high to deform the outlet face.


The YY-6CS utilizes a beige plastic enclosure with six grounded outlets arranged in a single row.
The most severe damage is concentrated around the neutral blade opening of the affected receptacle. This suggests that heating may have originated at the plug-to-receptacle interface rather than within the connected appliance itself. The exact cause could not be conclusively determined, although deterioration of the contact connection is considered a possible contributing factor.


An illuminated red rocker-style power switch is located near the power-cord entry point and is accompanied by bilingual surge-protection labeling.
The outlet exhibiting heat damage was not the outlet used by the space heater during the final documented period of service, indicating that the damage likely occurred earlier in the unit's operational life.


The documented example exhibits substantial dirt accumulation, cosmetic wear, and heat damage surrounding one outlet near the end opposite the power-cord entry.
The attachment plug exhibits severe heat discoloration and oxidation concentrated around one blade. Green corrosion products and dark thermal staining are visible on the plug body.
 
The enclosure measures approximately:
 
* Length: 10.125 in (25.7 cm)
* Width:
** Approximately 2.0 in (5.1 cm) at the control section
** Approximately 1.75 in (4.4 cm) at the outlet section
* Cord Length: Approximately 28 in (71 cm)
 
The printed surge-protection labeling above the rocker switch exhibits noticeable wear and smearing. Some of the lettering was further disturbed during cleaning of the documented example.
 
One outlet near the end opposite the power-cord entry exhibits significant heat damage and plastic deformation. The affected area includes visible transfer of molded lettering from a previously connected attachment plug, indicating that elevated temperatures were sufficient to soften the surrounding plastic.
 
The underside incorporates a molded production date wheel indicating manufacture during July 2006.


The YY-6CS uses a screw-fastened enclosure and incorporates underside mounting slots for wall or furniture installation.
The damaged receptacle and damaged plug are not located at opposite ends of the same connection, indicating that more than one connection point may have experienced elevated temperatures during the unit's service life.


A UL hologram affixed to the underside identifies the unit as a listed relocatable power tap.
Despite evidence of significant heating around one outlet, no corresponding deformation or damage is visible on the underside of the enclosure.


== Product Gallery ==
== Product Gallery ==
Line 136: Line 129:
== Testing ==
== Testing ==


The documented example was tested for basic electrical operation and wiring integrity.
The documented example was tested for basic electrical operation and wiring integrity. Testing with a receptacle tester confirmed correct hot, neutral, and ground wiring with no open grounds, open neutrals, reversed polarity conditions, or other wiring faults detected. The rocker switch successfully controlled power to all outlets, and the SURGE indicator illuminated during testing. The illuminated rocker switch exhibited visible flicker during operation while the unit continued to supply power to connected equipment.
 
Testing with a receptacle tester confirmed correct hot, neutral, and ground wiring. No open ground, open neutral, reversed polarity, or other wiring faults were detected.
 
The rocker switch successfully controlled power to all outlets.
 
When energized, the red SURGE indicator illuminated, indicating that surge-protection circuitry remained active.
 
The illuminated rocker switch exhibited visible flicker during operation while the unit continued to supply power to connected equipment.


<gallery mode="packed" heights="250">
<gallery mode="packed" heights="250">
Line 151: Line 136:
File:surge_yun_yy-6cs_testing_polaritygrounding_01.jpg|Outlet tester indicating correct wiring and grounding.
File:surge_yun_yy-6cs_testing_polaritygrounding_01.jpg|Outlet tester indicating correct wiring and grounding.
</gallery>
</gallery>
== Video ==
A video demonstrating the flickering illuminated rocker switch is available externally:
* [https://youtu.be/i5i3oL-6xoc Yun YY-6CS flickering rocker switch]


== Service History ==
== Service History ==
Line 169: Line 159:


Internally, the unit employs stamped brass outlet contact strips running the length of the enclosure. Power enters through a rocker switch located at the cord-entry end before being distributed to the outlet bus structure.
Internally, the unit employs stamped brass outlet contact strips running the length of the enclosure. Power enters through a rocker switch located at the cord-entry end before being distributed to the outlet bus structure.
A single metal-oxide varistor (MOV) is connected across the line and neutral conductors to provide surge suppression.


The internal construction is typical of cost-sensitive surge protectors of the period, utilizing metal contact strips retained by molded plastic features rather than individual wired receptacles.
The internal construction is typical of cost-sensitive surge protectors of the period, utilizing metal contact strips retained by molded plastic features rather than individual wired receptacles.
Line 175: Line 167:
File:surge_yun_yy-6cs_teardown_open_01.jpg|YY-6CS opened following removal of the enclosure screws. Internal construction consists of stamped brass outlet contacts, a rocker power switch, and direct-wired surge-protection circuitry.
File:surge_yun_yy-6cs_teardown_open_01.jpg|YY-6CS opened following removal of the enclosure screws. Internal construction consists of stamped brass outlet contacts, a rocker power switch, and direct-wired surge-protection circuitry.
File:surge_yun_yy-6cs_teardown_screws_01.jpg|Six enclosure screws removed prior to disassembly.
File:surge_yun_yy-6cs_teardown_screws_01.jpg|Six enclosure screws removed prior to disassembly.
File:surge_yun_yy-6cs_teardown_toppanelcordentry_01.jpg|Interior view of the upper enclosure half showing the cord-entry area, and outlet supports.
File:surge_yun_yy-6cs_teardown_toppanelcordentry_01.jpg|Interior view of the upper enclosure half showing the cord-entry area and outlet supports.
File:surge_yun_yy-6cs_teardown_protectioncircuit_01.jpg|Cord-entry section showing the rocker power switch, internal wiring, and surge-suppression components.
File:surge_yun_yy-6cs_teardown_protectioncircuit_close_01.jpg|Close-up of the rocker switch terminals and surge-suppression components connected across the power conductors.
File:surge_yun_yy-6cs_teardown_toppanel_end_meltedplastic_01.jpg|Interior view of the upper enclosure half at the heat-damaged outlet. Discoloration and deformation are visible around the affected receptacle supports.
File:surge_yun_yy-6cs_teardown_toppanel_end_meltedplastic_01.jpg|Interior view of the upper enclosure half at the heat-damaged outlet. Discoloration and deformation are visible around the affected receptacle supports.
File:surge_yun_yy-6cs_teardown_bottompanel_end_meltedplastic_01.jpg|Interior view of the outlet-end contact assemblies showing localized deformation associated with the heat-damaged receptacle.
File:surge_yun_yy-6cs_teardown_bottompanel_end_meltedplastic_01.jpg|Interior view of the outlet-end contact assemblies showing localized deformation associated with the heat-damaged receptacle.

Latest revision as of 16:02, 13 October 2026

The Yun YY-6CS is a six-outlet surge protector manufactured in July 2006.

The documented example remained in service until retirement and exhibited a flickering illuminated rocker switch during operation.

Inspection prior to documentation revealed significant dirt accumulation, a discolored power plug, and heat damage surrounding one outlet.

Overall view of the Yun YY-6CS.

Documented Example

  • OldSurge ID: OS-0012
  • Manufacturer: Yun
  • Model: YY-6CS
  • Manufacturing Date: July 2006

Specifications

  • Manufacturer: Yun
  • Model: YY-6CS
  • Manufacturing Date: July 2006
  • Device Type: Relocatable Power Tap / Surge Protector
  • Outlets: 6 grounded outlets
  • Length: Approximately 10.125 in (25.7 cm)
  • Width:
    • Approximately 2.0 in (5.1 cm) at the control section
    • Approximately 1.75 in (4.4 cm) at the outlet section
  • Power Cord:
    • Length: Approximately 28 in (71 cm)
    • Type: SJT
    • Conductors: 3
    • Wire Size: 14 AWG
    • Temperature Rating: 60°C
    • Flame Rating: VW-1 / FT1
    • Manufacturer: QIAOPU
    • UL File Number: E247978
  • Voltage Rating: 125 VAC
  • Current Rating: 15 A
  • Frequency: 60 Hz
  • Suppression Voltage Rating:
    • Line-to-Neutral (L-N): 600 V
  • Country of Manufacture: China
  • UL File Number: E225774
  • Power Cord Type: SJT

Physical Description

The YY-6CS utilizes a beige plastic enclosure with six grounded outlets arranged in a single row.

An illuminated red rocker-style power switch is located near the power-cord entry point and is accompanied by bilingual surge-protection labeling.

The enclosure measures approximately:

  • Length: 10.125 in (25.7 cm)
  • Width:
    • Approximately 2.0 in (5.1 cm) at the control section
    • Approximately 1.75 in (4.4 cm) at the outlet section
  • Cord Length: Approximately 28 in (71 cm)

The printed surge-protection labeling above the rocker switch exhibits noticeable wear and smearing. Some of the lettering was further disturbed during cleaning of the documented example.

One outlet near the end opposite the power-cord entry exhibits significant heat damage and plastic deformation. The affected area includes visible transfer of molded lettering from a previously connected attachment plug, indicating that elevated temperatures were sufficient to soften the surrounding plastic.

The underside incorporates a molded production date wheel indicating manufacture during July 2006. The attached power cord utilizes QIADPU-manufactured SJT cable marked UL file number E247978. Cord markings identify the assembly as a three-conductor 14 AWG cable carrying VW-1 and FT1 flame ratings together with a 60°C temperature rating.

The power cord terminates in a molded grounded attachment plug. The plug exhibits significant discoloration and thermal damage consistent with long-term service.

The YY-6CS uses a screw-fastened enclosure and incorporates underside mounting slots for wall or furniture installation.

A UL hologram affixed to the underside identifies the unit as a listed relocatable power tap.

Mounting Provisions

The YY-6CS incorporates two keyhole-style mounting slots on the underside of the enclosure.

The slot arrangement supports mounting in either horizontal or vertical orientations.

Weight

The documented example weighs approximately 10.6 oz (300 g).

Yun YY-6CS on a digital scale.
Yun YY-6CS on a digital scale.

Condition Upon Acquisition

The documented example exhibits substantial dirt accumulation, a flickering illuminated rocker switch, a discolored attachment plug, and significant heat damage surrounding one outlet near the end opposite the power-cord entry.

The damaged receptacle contains transferred lettering from a previously connected attachment plug. The softened plastic surrounding the outlet preserved portions of the plug's molded markings, indicating that temperatures became sufficiently high to deform the outlet face.

The most severe damage is concentrated around the neutral blade opening of the affected receptacle. This suggests that heating may have originated at the plug-to-receptacle interface rather than within the connected appliance itself. The exact cause could not be conclusively determined, although deterioration of the contact connection is considered a possible contributing factor.

The outlet exhibiting heat damage was not the outlet used by the space heater during the final documented period of service, indicating that the damage likely occurred earlier in the unit's operational life.

The attachment plug exhibits severe heat discoloration and oxidation concentrated around one blade. Green corrosion products and dark thermal staining are visible on the plug body.

The damaged receptacle and damaged plug are not located at opposite ends of the same connection, indicating that more than one connection point may have experienced elevated temperatures during the unit's service life.

Despite evidence of significant heating around one outlet, no corresponding deformation or damage is visible on the underside of the enclosure.

  • Overall view of the Yun YY-6CS.
    Overall view of the Yun YY-6CS.
  • Center outlet section.
    Center outlet section.
  • Heat-damaged outlet with melted plastic.
    Heat-damaged outlet with melted plastic.
  • Control section and illuminated rocker switch.
    Control section and illuminated rocker switch.
  • Left-side profile view.
    Left-side profile view.
  • Right-side profile view with visible outlet damage.
    Right-side profile view with visible outlet damage.
  • Cord-entry end with switch and strain relief.
    Cord-entry end with switch and strain relief.
  • Heat-damaged outlet showing transferred plug markings.
    Heat-damaged outlet showing transferred plug markings.
  • Close-up of outlet damage and transferred plug lettering.
    Close-up of outlet damage and transferred plug lettering.
  • Underside view showing labels, mounting slots, and electrical information.
    Underside view showing labels, mounting slots, and electrical information.
  • UL certification hologram and listing information.
    UL certification hologram and listing information.
  • Illuminated view of the UL hologram.
    Illuminated view of the UL hologram.
  • Underside specifications and ratings.
    Underside specifications and ratings.
  • Outlet-end underside view.
    Outlet-end underside view.
  • Date wheel indicating July 2006 manufacture.
    Date wheel indicating July 2006 manufacture.
  • Grounded attachment plug and power cord.
    Grounded attachment plug and power cord.
  • Heat-damaged attachment plug.
    Heat-damaged attachment plug.
  • Close-up of severe heat discoloration and oxidation around the plug blade.
    Close-up of severe heat discoloration and oxidation around the plug blade.
  • Power cord specifications and manufacturer markings.
    Power cord specifications and manufacturer markings.
  • Additional power cord specifications.
    Additional power cord specifications.

Testing

The documented example was tested for basic electrical operation and wiring integrity. Testing with a receptacle tester confirmed correct hot, neutral, and ground wiring with no open grounds, open neutrals, reversed polarity conditions, or other wiring faults detected. The rocker switch successfully controlled power to all outlets, and the SURGE indicator illuminated during testing. The illuminated rocker switch exhibited visible flicker during operation while the unit continued to supply power to connected equipment.

  • YY-6CS connected to power with the rocker switch in the OFF position.
    YY-6CS connected to power with the rocker switch in the OFF position.
  • SURGE indicator illuminated during testing.
    SURGE indicator illuminated during testing.
  • Outlet tester indicating correct wiring and grounding.
    Outlet tester indicating correct wiring and grounding.

Video

A video demonstrating the flickering illuminated rocker switch is available externally:

Service History

The documented example remained in active service until retirement and documentation by the OldSurge Archive.

Prior to retirement, the surge protector powered a variety of devices including a desktop calculator, paper shredder, and portable space heater.

The heater's attached warning label explicitly instructed users not to connect the appliance through an extension cord or power strip and instead to connect it directly to a wall receptacle.

YY-6CS photographed in service prior to retirement.
YY-6CS photographed in service prior to retirement.

Teardown

The YY-6CS uses a screw-fastened plastic enclosure secured by six screws.

Following screw removal, disassembly required additional effort due to deformation and adhesion of heat-damaged internal plastic near the affected receptacle. Despite the thermal damage, the enclosure was successfully separated without significant additional breakage.

Internally, the unit employs stamped brass outlet contact strips running the length of the enclosure. Power enters through a rocker switch located at the cord-entry end before being distributed to the outlet bus structure.

A single metal-oxide varistor (MOV) is connected across the line and neutral conductors to provide surge suppression.

The internal construction is typical of cost-sensitive surge protectors of the period, utilizing metal contact strips retained by molded plastic features rather than individual wired receptacles.

  • YY-6CS opened following removal of the enclosure screws. Internal construction consists of stamped brass outlet contacts, a rocker power switch, and direct-wired surge-protection circuitry.
    YY-6CS opened following removal of the enclosure screws. Internal construction consists of stamped brass outlet contacts, a rocker power switch, and direct-wired surge-protection circuitry.
  • Six enclosure screws removed prior to disassembly.
    Six enclosure screws removed prior to disassembly.
  • Interior view of the upper enclosure half showing the cord-entry area and outlet supports.
    Interior view of the upper enclosure half showing the cord-entry area and outlet supports.
  • Cord-entry section showing the rocker power switch, internal wiring, and surge-suppression components.
    Cord-entry section showing the rocker power switch, internal wiring, and surge-suppression components.
  • Close-up of the rocker switch terminals and surge-suppression components connected across the power conductors.
    Close-up of the rocker switch terminals and surge-suppression components connected across the power conductors.
  • Interior view of the upper enclosure half at the heat-damaged outlet. Discoloration and deformation are visible around the affected receptacle supports.
    Interior view of the upper enclosure half at the heat-damaged outlet. Discoloration and deformation are visible around the affected receptacle supports.
  • Interior view of the outlet-end contact assemblies showing localized deformation associated with the heat-damaged receptacle.
    Interior view of the outlet-end contact assemblies showing localized deformation associated with the heat-damaged receptacle.
  • Close-up of the heat-damaged receptacle contact assembly showing melted plastic and deformation surrounding the outlet contact structure.
    Close-up of the heat-damaged receptacle contact assembly showing melted plastic and deformation surrounding the outlet contact structure.
Retrieved from "https://oldsurge.com/index.php?title=Yun_YY-6CS&oldid=1475"