COXOC CO-001S

The COXOC CO-001S is a six-outlet surge protector manufactured by COXOC during the consumer-computing era of the 1990s.

The model combines six grounded outlets, a resettable circuit breaker, and basic surge suppression within a compact enclosure distinguished by its heavily textured finish and unusual paired-outlet arrangement. The documented example is additionally notable for preserving COXOC branding on the attachment plug and for illustrating an extremely simple single-MOV surge-suppression design.

The CO-001S represents a product category no longer prominently represented within COXOC's modern product offerings and provides insight into the lower-complexity end of the consumer surge-protector market.

• 
  Overall view of the documented COXOC CO-001S specimen.

Overview

The COXOC CO-001S is a consumer surge protector intended to provide both surge suppression and AC power distribution for computers, peripherals, office equipment, and household electronics.

The design incorporates six grounded outlets arranged in three molded pairs, a rocker power switch, a resettable circuit breaker, and a permanently attached power cord. Its heavily textured enclosure and stepped switch housing give the unit a distinctive appearance compared with many later surge protectors utilizing smoother case designs.

Limited documentation of the model has presently been identified. Surviving examples suggest that the CO-001S originated during a period when Taiwanese manufacturers supplied large quantities of surge protectors and power-distribution products to North American consumers, often under lesser-known brand names.

The documented example was acquired as part of the OldSurge Archive's efforts to preserve and document products from manufacturers that have largely disappeared from the consumer surge-protection market.

Historical Context

COXOC was historically associated with surge protectors, power strips, and related electrical accessories. As documented by the archive's October 2026 review of the company's website, however, the company's contemporary product offerings emphasize electronic connectors and related technologies rather than surge-protection products.

The CO-001S appears representative of the surge-protector designs widely marketed during the 1990s, when many consumer products emphasized outlet capacity, basic surge suppression, and low-cost construction. The model combines a full 15-amp power-distribution system with a notably simple surge-suppression circuit consisting of a single metal-oxide varistor (MOV).

As a result, the CO-001S provides insight into a segment of the consumer surge-protector market that is no longer prominently represented within COXOC's modern product lineup.

Documented Example

• OldSurge ID: OS-0028
• Manufacturer: COXOC
• Model: CO-001S
• Manufacturing Date: 1990s (estimated)

Specifications

The COXOC CO-001S combines six grounded outlets, a 15-amp resettable circuit breaker, and basic MOV-based surge suppression within a compact enclosure. Despite its relatively lightweight construction, the unit utilizes a full-size 14 AWG power cord and carries standard North American electrical ratings.

• Manufacturer: COXOC
• Model: CO-001S
• Device Type: Surge Protector
• Country of Origin: China

• Outlets: 6 grounded outlets
• Protection: AC power-line surge suppression
• Circuit Breaker: RONG FENG RF-112B

• Electrical Rating: 125V, 15A, 60Hz
• Transient Suppression Voltage Rating: 330V

• Length: Approximately 10.25 in (26.0 cm)
• Width: Approximately 1.56 in (4.0 cm)
• Height: Approximately 1.13 in (2.9 cm) at receptacle section
• Height: Approximately 1.50 in (3.8 cm) at switch section
• Weight: Approximately 14.3 oz (405 g)

• Power Cord Length: Approximately 4.5 ft (1.37 m)
• Cord Type: SJT
• Conductors: 3 × 14 AWG (2.08 mm²)
• Cord Manufacturer: Apollo
• Cord UL File Number: E55351
• Cord CSA File Number: LL34977

• Plug Type: NEMA 5-15P
• Plug Style: Straight-Blade

• Surge Protector UL File Number: E147475

Notable Characteristics

• Single-MOV surge-suppression design.
• No printed-circuit board.
• RONG FENG RF-112B resettable circuit breaker.
• Apollo-manufactured SJT 14/3 power cord.
• COXOC branding identified solely on the attachment plug.

Weight

The documented example weighs approximately 14.3 ounces (405 g).

Despite incorporating six grounded outlets, a 15-amp resettable circuit breaker, a full-length stamped-metal outlet-contact assembly, and a 14 AWG power cord, the CO-001S is among the lighter surge protectors currently documented by the archive.

The relatively low weight reflects the unit's compact dimensions and highly simplified surge-suppression design. Compared with many contemporary surge protectors preserved by the archive, the CO-001S utilizes fewer internal components while maintaining a full 15-amp electrical rating.

COXOC CO-001S surge protector on a digital scale showing a weight of approximately 14.3 ounces (405 g).

Physical Characteristics

The COXOC CO-001S utilizes a compact rectangular enclosure measuring approximately 10.25 inches (26.0 cm) long and 1.56 inches (4.0 cm) wide. The receptacle section is approximately 1.13 inches (2.9 cm) tall, while a raised housing at the cord-entry end increases overall height to approximately 1.50 inches (3.8 cm).

A heavily textured pebble-grain finish is molded into both enclosure halves. This textured appearance distinguishes the CO-001S from many later surge protectors that utilize smoother exterior surfaces.

The upper surface incorporates six grounded receptacles arranged in three outlet pairs separated by molded divider lines. The paired arrangement creates a distinctive appearance and visually differs from the uninterrupted outlet rows commonly found on many competing designs.

The raised cord-entry housing contains a red rocker power switch together with an externally accessible resettable circuit breaker. The outlet end of the enclosure incorporates a simple rounded profile and does not contain additional indicators or controls.

The underside incorporates two keyhole-style mounting slots intended for wall or furniture mounting. Regulatory and electrical information is molded directly into the bottom enclosure rather than applied using a printed or adhesive label. The molded panel identifies the model number, electrical ratings, surge-suppression voltage rating, UL file number, and country of manufacture.

The documented example utilizes a molded straight-blade NEMA 5-15P attachment plug connected to an Apollo-manufactured SJT 14/3 power cord. Cord markings identify three 14 AWG conductors together with UL file number E55351 and CSA file number LL34977.

Although the surge protector itself carries no prominent external manufacturer branding, the attachment plug incorporates a molded COXOC logo that provided the evidence necessary to positively identify the manufacturer.

Photographs

• 
  Overall view of the documented COXOC CO-001S specimen.
• 
  Six grounded outlets arranged in three molded outlet pairs.
• 
  Rocker switch and textured enclosure detail.
• 
  Outlet end showing the rounded enclosure profile and textured finish.
• 
  Side profile showing the elevated switch housing and paired outlet arrangement.
• 
  Side profile showing the elevated switch housing and paired outlet arrangement.
• 
  Cord-entry end showing the resettable circuit breaker and strain-relief assembly.
• 
  Bottom view showing mounting features, molded regulatory information, and attached power cord.
• 
  Cord-entry area showing the resettable circuit breaker and strain-relief assembly.
• 
  Molded regulatory-information panel showing electrical ratings and UL information.
• 
  Outlet-end underside showing wall-mounting features and enclosure construction.
• 
  Attachment plug and cord markings showing SJT construction and 14 AWG conductors.
• 
  Attachment plug showing certification markings and evidence of previous heat exposure.
• 
  Apollo-manufactured SJT 14/3 power-cord assembly.
• 
  Cord markings showing CSA certification, FT2 flame rating, and conductor information.
• 
  Attachment plug showing molded COXOC branding and textured construction.
• 
  Close-up of the molded COXOC logo on the plug body.

Date Codes

No serial number, manufacturing date, or date-code markings have presently been identified on the exterior of the documented example.

The molded regulatory-information panel identifies the unit as model CO-001S, confirms a maximum electrical rating of 125 volts, 15 amperes, and 60 hertz, and specifies a transient suppression voltage rating of 330 volts. The panel also identifies UL file number E147475 and confirms manufacture in China.

Additional molded markings are present within the enclosure. A single numeral resembling either "5" or "2" is molded into the interior of the upper housing. Although its significance has not been determined, the marking appears more likely to represent a tooling, cavity, or mold identifier than a manufacturing-date code.

In the absence of documented date codes, packaging, manufacturer literature, or other independent manufacturing evidence, the production date of the documented example presently remains undetermined. Based upon overall design characteristics and construction methods, however, the unit likely dates to the consumer-computing era of the 1990s.

Condition Upon Acquisition

The documented example was acquired in used condition and exhibited light cosmetic wear consistent with long-term residential or office use.

The textured enclosure remained structurally intact and displayed only minor scuffs, scratches, and accumulated dust. Compared with many similarly aged surge protectors preserved by the archive, discoloration was relatively modest and the housing retained a generally uniform appearance.

The attached power cord, strain-relief assembly, rocker switch, and receptacles appeared complete and undamaged upon initial examination.

The most significant condition-related observation involved the attachment plug. Localized discoloration was present adjacent to both current-carrying blades, and minor separation was visible between the blade assemblies and the surrounding molded plastic body.

The condition is consistent with previous exposure to elevated temperatures at the attachment-plug interface. Although the exact cause cannot be determined from visual examination alone, prolonged operation under high electrical load, poor receptacle contact tension, or similar service conditions may have contributed to the observed damage.

Notably, a second archived COXOC CO-001S example does not exhibit comparable discoloration or blade separation, suggesting that the condition is specific to the documented example rather than an inherent characteristic of the product design.

The attachment plug proved particularly important during documentation because it incorporates the only visible COXOC branding presently identified on the artifact. The molded logo provided the evidence necessary to positively associate the model with COXOC and distinguish it from numerous otherwise similar generic surge protectors.

The documented example was photographed in its final service location prior to retirement and documentation. No equipment was connected to the unit at the time the photograph was taken.

The unit was subsequently cleaned prior to detailed photography, testing, and teardown.

• 
  Condition upon acquisition prior to cleaning and documentation.
• 
  Installed in its final service location prior to retirement.

Functional Testing

The documented example was tested for basic electrical operation, switch functionality, and outlet wiring integrity.

When connected to utility power, the rocker switch successfully controlled power to the protected outlets. Functional testing confirmed that the unit remained operational.

No illumination was observed from the rocker switch during testing. It has not yet been determined whether the switch incorporates a failed indicator lamp or was originally manufactured without illumination despite its translucent red appearance.

Testing with a receptacle tester confirmed correct hot, neutral, and ground connections at the protected outlets. No open grounds, open neutrals, reversed polarity conditions, or other wiring faults were detected.

The documented example passed all functional testing performed during documentation and remained operational at the time of examination.

• 
  Connected to utility power with the rocker switch in the OFF position.
• 
  Connected to utility power during functional testing.
• 
  Outlet tester indicating correct wiring and grounding.

Teardown

The COXOC CO-001S enclosure is secured using three Phillips-head screws and can be opened non-destructively.

Removal of the upper housing revealed an unusually simple internal construction consisting of a stamped-metal outlet-contact assembly, a resettable circuit breaker, a rocker power switch, and a single metal-oxide varistor (MOV) providing surge suppression.

Power enters through the attached Apollo-manufactured SJT 14/3 power cord before passing through a RONG FENG RF-112B resettable circuit breaker rated 15 amperes at 125 volts AC. Electrical distribution is accomplished through a long stamped-metal contact assembly extending the length of the enclosure and serving all six receptacles.

Unlike many surge protectors documented by the archive, the CO-001S does not utilize a printed-circuit board. Surge suppression is provided solely by a single SAS 241KD14 metal-oxide varistor connected directly between the hot and neutral conductors using short wire leads and soldered connections.

No additional MOVs, line-to-ground suppression paths, filtering inductors, capacitors, thermal cutoffs, indicator circuitry, or other supplemental surge-suppression components were observed. The design therefore represents one of the simplest surge-suppression implementations currently documented by the OldSurge Archive.

Despite the simplicity of the suppression circuitry, the unit incorporates a substantial stamped-metal outlet-contact assembly, a full 15-amp resettable circuit breaker, and a 14 AWG power cord. The design appears to prioritize robust power distribution while providing only basic transient-voltage suppression.

The documented MOV remains commercially available through modern electronic-component distributors. Contemporary component documentation identifies comparable 241KD14 devices as 14 mm MOV surge suppressors intended for AC power-line protection applications.

UL certification records additionally confirm that the RONG FENG RF-112B belongs to a certified supplementary-protector product family manufactured by Rong Feng Industrial Co., Ltd.

No evidence of overheating, damaged conductors, arcing, failed components, or internal electrical failure was observed. Internal components appeared consistent with normal long-term use.

The observed heat-related damage at the attachment plug therefore appears unrelated to any obvious internal failure within the surge protector itself.

• 
  CO-001S opened following removal of the three enclosure screws.
• 
  Interior of the upper enclosure showing outlet guides and structural reinforcements.
• 
  Stamped-metal outlet-contact assembly providing power distribution to all six receptacles.
• 
  Upper-enclosure cord-entry section showing molded structural features and cavity markings.
• 
  Cord-entry section showing the switch assembly, circuit breaker, wiring, and surge-suppression components.
• 
  RONG FENG RF-112B resettable circuit breaker rated 15A at 125VAC.
• 
  Cord-entry detail showing the single-MOV surge-suppression circuit.
• 
  SAS 241KD14 metal-oxide varistor (MOV) providing surge suppression.

Comparison Notes

The COXOC CO-001S occupies a distinctive position within the OldSurge Archive because it demonstrates an unusually minimalist approach to surge protection. Unlike products from APC, Universal, Globe Electric, PowerSentry, and other manufacturers that incorporate multiple surge-suppression components, dedicated circuit boards, filtering networks, or diagnostic indicators, the CO-001S relies upon a single metal-oxide varistor connected directly across the incoming AC supply.

Despite the simplicity of its suppression circuitry, the unit incorporates several comparatively robust power-distribution features including a full 15-amp resettable circuit breaker, an Apollo-manufactured 14 AWG SJT power cord, and a substantial stamped-metal outlet-contact assembly extending the length of the enclosure.

The resulting design appears to emphasize reliable power distribution, straightforward manufacturing, and low component count while providing basic transient-voltage suppression. As such, the CO-001S provides a useful reference point for understanding the lower-complexity end of the consumer surge-protector market.

Recall Information

No recall information has presently been identified for the COXOC CO-001S.

Historical References

Teardown examination identified several components for which modern documentation remains available.

Surge suppression within the documented example is provided by a SAS 241KD14 metal-oxide varistor (MOV). Comparable 241KD14 devices remain commercially available through modern electronic-component distributors and continue to be marketed for AC power-line surge-suppression applications.

The CO-001S also incorporates a RONG FENG RF-112B resettable circuit breaker. Contemporary UL certification records identify the RF-112B as part of a certified supplementary-protector product family manufactured by Rong Feng Industrial Co., Ltd.

• 
  Modern Mouser Electronics listing for a 241KD14 metal-oxide varistor comparable to the component documented within the COXOC CO-001S.
• 
  UL certification information for the RONG FENG RF-112B circuit-breaker series documented within the COXOC CO-001S.

Notes

• OldSurge ID: OS-0028.
• COXOC branding was identified solely through markings molded into the attachment plug.
• Manufacturer identification was established through a molded COXOC logo on the attachment plug.
• Utilizes an Apollo-manufactured SJT 14/3 power cord.
• Utilizes a RONG FENG RF-112B resettable circuit breaker rated 15A at 125VAC.
• Utilizes a single SAS 241KD14 metal-oxide varistor for surge suppression.
• No printed-circuit board is present.
• One of the simplest surge-suppression designs currently documented by the OldSurge Archive.

Related Articles

• COXOC
• Power Cord Comparison
• Surge Protectors
• Collection Index