APC SurgeArrest Professional PRO7 (Z94030204087)

The APC SurgeArrest Professional PRO7 documented here bears serial number Z94030204087, indicating manufacture in 1994. The unit was manufactured in China and represents the earliest APC PRO7 specimen currently documented by the OldSurge Archive.

This example is particularly notable for its early branding variation, a suppression board carrying a ©1993 copyright notice, and its inclusion within the manufacturing period affected by the 2013 APC SurgeArrest recall.

Overview

Manufacturer	APC (American Power Conversion)
Product Family	SurgeArrest Professional
Model	PRO7
Serial Number	Z94030204087
Manufacturing Year	1994
Country of Manufacture	China
Product Type	Surge Protector
AC Outlets	7
Recall Status	Included in APC SurgeArrest Recall (2013)

Notable Characteristics

Earliest APC PRO7 specimen currently documented by the OldSurge Archive.
Manufactured in 1994.
Includes a suppression board carrying a ©1993 copyright notice.
Manufactured during the period covered by the APC SurgeArrest Recall (2013).
Utilizes an early Professional SurgeArrest logo design not observed on later documented examples.
Appears to utilize an earlier straight-blade attachment-plug design rather than the right-angle plug found on later documented specimens.
Rocker-switch ON/OFF markings exhibit substantial wear.
Manufactured in China.
Utilizes an early Professional SurgeArrest logo variation not observed on later documented PRO7 specimens.

Specifications

Length: Approximately 10.25 in (26.0 cm)
Width: Approximately 4.19 in (10.6 cm)
Height:
- Approximately 1.69 in (4.3 cm) at the outlet section
- Approximately 1.75 in (4.4 cm) at the curved upper enclosure
Electrical Rating: 120VAC, 15A, 50/60Hz
Country of Manufacture: China
UL File: E111219
UL 1363 Temporary Power Tap Listed
UL 1449 TVSS Listed
TVSS Ratings:
- L-N 330V
- L-G 330V
- N-G 330V

Physical Characteristics

The APC PRO7 utilizes a two-section enclosure consisting of a rectangular lower outlet housing and a distinctive curved upper enclosure containing the switch, indicators, and surge-suppression circuitry.

The documented example retains the early Professional SurgeArrest logo design consisting of a blue PROFESSIONAL banner above SURGE ARREST branding with AMERICAN POWER CONVERSION printed beneath.

Two indicator lamps labeled Protection Working and Site Wiring Fault are positioned adjacent to the power switch.

The rocker switch remains present and operational, although the molded ON/OFF markings exhibit substantial wear from long-term service.

The underside incorporates two wall-mount keyhole slots and a recessed serial-number label identifying the unit as PRO7 serial number Z94030204087.

Unlike later documented APC PRO7 examples, the documented 1994 specimen utilizes different branding graphics and appears to employ an earlier-generation attachment-plug design.

The enclosure incorporates TVSS identification markings and suppression ratings of 330 volts for line-to-neutral, line-to-ground, and neutral-to-ground protection modes.

Photographs

Overall view showing the seven-outlet layout, attached power cord, and early Professional SurgeArrest branding.
Early Professional SurgeArrest logo and indicator lights.
Power switch showing wear to the ON/OFF markings.
Side profile showing the seven-outlet section and rectangular lower enclosure.
End view showing the distinctive curved upper enclosure of the early PRO7 design.
Side profile showing enclosure construction, outlet arrangement, and overall condition.
Cord-entry end showing strain relief, enclosure profile, and switch location.
Underside showing product markings, wall-mount slots, enclosure hardware, and attached power cord.
Model identification, safety markings, TVSS ratings, and serial-number label.