Belkin SurgeMaster F9H710-06: Difference between revisions

From OldSurge.com
Jump to navigation Jump to search
PowerPig (talk | contribs)
No edit summary
PowerPig (talk | contribs)
No edit summary
Line 9: Line 9:
== Physical Description ==
== Physical Description ==


The F9H710-06 incorporates sliding covers over all seven outlets. These covers may be positioned to expose or conceal the outlet openings when not in use, helping to reduce the accumulation of dust and debris.
The F9H710-06 incorporates sliding outlet covers on all seven outlets. These covers may be positioned to expose or conceal outlet openings when not in use, reducing the accumulation of dust and debris.
 
The documented example exhibited dirt accumulation within the cover recesses. Following cleaning, all outlet covers operated normally.
 
Telephone-line protection is provided through modular input and output jacks located at one end of the enclosure. A gray cable-management bracket may be raised to install cables and lowered to retain them in place.


The documented example exhibited stiffness due to accumulated dirt and age-related contamination. Following cleaning, all outlet covers operated normally.


The telephone-line protection section utilizes RJ11-style modular connectors. The documented example appears to employ only the center conductor positions, consistent with two-conductor telephone-line applications.


== Features ==
== Features ==
Line 33: Line 35:
* Length: Approximately 14.25 in (36.2 cm)
* Length: Approximately 14.25 in (36.2 cm)
* Width:
* Width:
** Approximately 3.125 in (7.9 cm) at the control section
** Approximately 3.125 in (7.9 cm) across the top surface
** Approximately 2.25 in (5.7 cm) at the outlet section
** Approximately 2.25 in (5.7 cm) across the base
* Height: Approximately 1.75 in (4.4 cm)
* Height: Approximately 1.75 in (4.4 cm)
* Cord Length: Approximately 6 ft (1.8 m)




Line 42: Line 45:
No disassembly was attempted.
No disassembly was attempted.


The enclosure appears to be assembled using internal plastic retention clips rather than externally accessible screws. Opening the housing would likely require prying apart the enclosure along the seam, potentially damaging the case or visible exterior surfaces.
The enclosure appears to utilize a snap-together construction with internal plastic retention clips. No externally accessible screws were observed. Opening the housing would likely require prying apart the enclosure along the seam, potentially damaging the case or visible exterior surfaces.


To preserve the condition of the documented example, the unit was not disassembled.
To preserve the condition of the documented example, disassembly was not attempted.


== Product Gallery ==
== Product Gallery ==
Line 58: Line 61:
File:surge-Belkin-SurgeMaster-F9H710-06-outletsclose_02.jpg|Outlet cover opened to expose the receptacle.
File:surge-Belkin-SurgeMaster-F9H710-06-outletsclose_02.jpg|Outlet cover opened to expose the receptacle.
File:surge-Belkin-SurgeMaster-F9H710-06-end_phoneprotection_01.jpg|Telephone-line protection ports and cable-management bracket.
File:surge-Belkin-SurgeMaster-F9H710-06-end_phoneprotection_01.jpg|Telephone-line protection ports and cable-management bracket.
File:surge-Belkin-SurgeMaster-F9H710-06-end_cablemgmtbracketraised_01.jpg|Cable-management bracket raised.
File:surge-Belkin-SurgeMaster-F9H710-06-top-end_01.jpg|Telephone protection section and cable retainer.
File:surge-Belkin-SurgeMaster-F9H710-06-bottomoverview_01.jpg|Underside view showing mounting provisions and product markings.
</gallery>
</gallery>



Revision as of 14:12, 15 September 2026

Belkin SurgeMaster F9H710-06

Overview

The Belkin SurgeMaster F9H710-06 is a seven-outlet surge protector featuring telephone-line protection, surge suppression, and an attached six-foot power cord.

The model was marketed as part of Belkin's SurgeMaster product family and was intended for protecting computers, peripherals, telecommunications equipment, and other consumer electronics from power surges.

Physical Description

The F9H710-06 incorporates sliding outlet covers on all seven outlets. These covers may be positioned to expose or conceal outlet openings when not in use, reducing the accumulation of dust and debris.

The documented example exhibited dirt accumulation within the cover recesses. Following cleaning, all outlet covers operated normally.

Telephone-line protection is provided through modular input and output jacks located at one end of the enclosure. A gray cable-management bracket may be raised to install cables and lowered to retain them in place.


Features

  • Seven grounded AC outlets
  • Sliding outlet covers on all seven outlets
  • Protected-status indicator
  • Grounded-status indicator
  • Non-illuminated rocker power switch
  • Telephone-line surge protection
  • Cable-management bracket
  • Attached six-foot power cord


Specifications

  • Model: F9H710-06
  • Outlets: 7
  • Cord Length: Approximately 6 ft
  • Length: Approximately 14.25 in (36.2 cm)
  • Width:
    • Approximately 3.125 in (7.9 cm) across the top surface
    • Approximately 2.25 in (5.7 cm) across the base
  • Height: Approximately 1.75 in (4.4 cm)
  • Cord Length: Approximately 6 ft (1.8 m)


Construction Notes

No disassembly was attempted.

The enclosure appears to utilize a snap-together construction with internal plastic retention clips. No externally accessible screws were observed. Opening the housing would likely require prying apart the enclosure along the seam, potentially damaging the case or visible exterior surfaces.

To preserve the condition of the documented example, disassembly was not attempted.

Service History

The documented example remained in active service until 2026, when it was replaced by an Amazon Basics 270103-B surge protector.

Documented example in service prior to retirement.

At the time of removal from service, both the Protected and Grounded indicators remained illuminated, suggesting that surge protection and grounding status were still present.