APC SurgeArrest Professional PRO7 (1Z0222R02812) - Revision history

PowerPig at 17:12, 12 November 2026

2026-11-12T17:12:21Z

← Older revision		Revision as of 17:12, 12 November 2026
Line 1:		Line 1:
	The APC SurgeArrest Professional PRO7 documented in this article (serial number 1Z0222R02812) was manufactured during May 2002 and was ultimately retired under APC's long-running SurgeArrest recall program. Unlike many documented examples that remain intact, this unit underwent a complete destructive teardown to document its construction, component weights, material composition, and manufacturing characteristics prior to disposal.		The APC SurgeArrest Professional PRO7 documented in this article (serial number 1Z0222R02812) was manufactured during May 2002 and was ultimately retired under APC's long-running SurgeArrest recall program. Unlike many documented examples that remain intact, this unit underwent a complete destructive teardown to document its construction, component weights, material composition, and manufacturing characteristics prior to disposal.

	This example is historically noteworthy because it contains a printed circuit board bearing a 1997 copyright marking despite manufacturing evidence placing final assembly in 2002. A separate December 2002 PRO7 previously documented by OldSurge contained a newer board carrying a 2002 copyright marking, demonstrating that multiple PCB generations were in use within the PRO7 product line during 2002.		This example is historically noteworthy because it contains a printed circuit board bearing a 1997 copyright marking despite manufacturing evidence placing final assembly in 2002. A separate December 2002 PRO7 previously documented by OldSurge ([[APC SurgeArrest Professional PRO7 (2Z0250P17876)]]) contained a newer board carrying a 2002 copyright marking, demonstrating that multiple PCB generations were in use within the PRO7 product line during 2002.

	Following submission under the APC SurgeArrest recall program, APC advised that replacement surge protectors were no longer being provided and instead issued a $30 Amazon gift card. The owner was instructed to disable the unit by cutting the power cord before disposal, making complete teardown and material documentation possible.		Following submission under the APC SurgeArrest recall program, APC advised that replacement surge protectors were no longer being provided and instead issued a $30 Amazon gift card. The owner was instructed to disable the unit by cutting the power cord before disposal, making complete teardown and material documentation possible.
Line 17:		Line 17:


	~~Describe where~~ the ~~product fits within its manufacturer lineup, market segment, technological era, or product family~~.		The solder side of the PCB carries a copyright date of 1997 and a revision marking of REV 12. This is notable because enclosure date codes and serial number evidence place manufacture of the completed surge protector in May 2002.

	~~Examples:~~

	* Consumer vs commercial product
	* OEM vs retail product
	* Relationship to recalls
	* Introduction of ~~new features~~
	* Differences from previous generations

			A separate PRO7 documented by OldSurge and produced during December 2002 contained a PCB bearing a 2002 copyright marking. The existence of both designs within the same calendar year suggests that APC transitioned between PCB revisions during 2002 while continuing to manufacture the PRO7 product family.

	== Documented Example ==		== Documented Example ==

	* OldSurge ID: OS-~~XXXX~~		* OldSurge ID: OS-0032
	* Manufacturer:		* Manufacturer: APC
	* ~~Model~~:		* Product Family: SurgeArrest Professional
	* ~~Part Number~~:		* Model: PRO7
	* Serial Number:		* Serial Number: 1Z0222R02812
	* Manufacturing Date:		* Manufacturing Date: May 2002 (based on enclosure date codes and serial number)
			* Country of Origin: China

	== Specifications ==		== Specifications ==
Line 66:		Line 59:
	* UL File Number:		* UL File Number:
	* CSA File Number:		* CSA File Number:


	== Notable Characteristics ==		== Notable Characteristics ==

	* ~~Characteristic 1~~		* Manufactured during May 2002 based on molded enclosure date codes.
	* ~~Characteristic 2~~		* Contains a PCB carrying a 1997 copyright date and REV 12 marking.
	* ~~Characteristic 3~~		* Documented through complete destructive teardown following APC recall redemption.
			* Upper enclosure molded from flame-retardant high-impact polystyrene (FR-HIPS).
			* Internal enclosure includes molded part number 870-2041.
			* APC issued a $30 Amazon gift card in lieu of replacement hardware under the recall program.

	== Weight ==		== Weight ==
Line 137:		Line 131:

	The interior surface of the top enclosure half is molded with part number 870-2041 and a revision marking "R". Such molded tooling identifiers can help distinguish enclosure revisions and manufacturing changes between examples.		The interior surface of the top enclosure half is molded with part number 870-2041 and a revision marking "R". Such molded tooling identifiers can help distinguish enclosure revisions and manufacturing changes between examples.

			Because this example had already been redeemed under the APC SurgeArrest recall program and was scheduled for disposal, a complete destructive teardown was performed to document construction details and recover weight measurements for individual components.

			The upper enclosure half was molded from flame-retardant high-impact polystyrene (FR-HIPS) and weighed 5.2 oz (147 g). Internal markings include molded part number 870-2041 and date wheels indicating April and May 2002 production.

			The printed circuit board carries a 1997 copyright marking and revision designation REV 12. Despite this older copyright date, enclosure date codes and serial-number evidence place final manufacture during 2002. Comparison with a December 2002 example containing a PCB marked 2002 suggests APC employed multiple PCB revisions within the PRO7 product line during 2002.

	<gallery mode="packed" heights="250">		<gallery mode="packed" heights="250">

PowerPig at 17:06, 12 November 2026

2026-11-12T17:06:15Z

← Older revision		Revision as of 17:06, 12 November 2026
Line 1:		Line 1:
	~~Brief introductory summary of~~ the ~~documented artifact~~.		The APC SurgeArrest Professional PRO7 documented in this article (serial number 1Z0222R02812) was manufactured during May 2002 and was ultimately retired under APC's long-running SurgeArrest recall program. Unlike many documented examples that remain intact, this unit underwent a complete destructive teardown to document its construction, component weights, material composition, and manufacturing characteristics prior to disposal.

			This example is historically noteworthy because it contains a printed circuit board bearing a 1997 copyright marking despite manufacturing evidence placing final assembly in 2002. A separate December 2002 PRO7 previously documented by OldSurge contained a newer board carrying a 2002 copyright marking, demonstrating that multiple PCB generations were in use within the PRO7 product line during 2002.

			Following submission under the APC SurgeArrest recall program, APC advised that replacement surge protectors were no longer being provided and instead issued a $30 Amazon gift card. The owner was instructed to disable the unit by cutting the power cord before disposal, making complete teardown and material documentation possible.

	<gallery mode="packed" heights="250">		<gallery mode="packed" heights="250">
	File:~~Main_Image~~.jpg\|~~center\|600px\|Primary view of the documented artifact~~.		File:surge_APC_PRO7_1Z0222R02812_Initial_weight_01.jpg\|APC SurgeArrest Professional PRO7 prior to teardown, weighing 1 lb 15.7 oz.
	</gallery>		</gallery>

Line 75:		Line 79:

	The documented APC SurgeArrest Professional PRO7 weighed 1 lb 15.7 oz (899 g) prior to disassembly. Because this example underwent a complete destructive teardown for material analysis, the total weight serves as a baseline for comparison against the weight of individual recovered components including the power cord, enclosure, bus bars, printed circuit board, and suppression components.		The documented APC SurgeArrest Professional PRO7 weighed 1 lb 15.7 oz (899 g) prior to disassembly. Because this example underwent a complete destructive teardown for material analysis, the total weight serves as a baseline for comparison against the weight of individual recovered components including the power cord, enclosure, bus bars, printed circuit board, and suppression components.

			The upper enclosure shell weighed 5.2 oz (147 g), representing approximately 16.4% of the assembled unit weight. The enclosure was molded from flame-retardant high-impact polystyrene (FR-HIPS).


	<gallery mode="packed" heights="250">		<gallery mode="packed" heights="250">
	File:surge_APC_PRO7_1Z0222R02812_Initial_weight_01.jpg\|APC SurgeArrest Professional PRO7 prior to teardown, weighing 1 lb 15.7 oz.		File:surge_APC_PRO7_1Z0222R02812_Initial_weight_01.jpg\|APC SurgeArrest Professional PRO7 prior to teardown, weighing 1 lb 15.7 oz.
			File:surge_APC_PRO7_1Z0222R02812_toppanel_weight_01.jpg\|Upper enclosure half weighing 5.2 ounces.
	</gallery>		</gallery>

Line 88:		Line 96:

	<gallery mode="packed" heights="250">		<gallery mode="packed" heights="250">
	File:surge_APC_PRO7_1Z0222R02812_SN_01.jpg\|~~Internal~~ APC identification label showing model PRO7 and serial number 1Z0222R02812.		File:surge_APC_PRO7_1Z0222R02812_SN_01.jpg\|External APC identification label showing model PRO7 and serial number 1Z0222R02812.
			File:surge_APC_PRO7_1Z0222R02812_toppanel_detail_01.jpg\|Molded enclosure detail showing part number 870-2041.
	</gallery>		</gallery>

Line 126:		Line 135:

	Two molded date wheels are present on the inside of the enclosure. Both enclosure components are dated May 2002. These markings are consistent with production during mid-2002 and place the documented example approximately seven months earlier than the December 2002 example previously documented by OldSurge. ([[APC SurgeArrest Professional PRO7 (2Z0250P17876)]])		Two molded date wheels are present on the inside of the enclosure. Both enclosure components are dated May 2002. These markings are consistent with production during mid-2002 and place the documented example approximately seven months earlier than the December 2002 example previously documented by OldSurge. ([[APC SurgeArrest Professional PRO7 (2Z0250P17876)]])

			The interior surface of the top enclosure half is molded with part number 870-2041 and a revision marking "R". Such molded tooling identifiers can help distinguish enclosure revisions and manufacturing changes between examples.

	<gallery mode="packed" heights="250">		<gallery mode="packed" heights="250">
	File:surge_APC_PRO7_1Z0222R02812_Insidetoppanel_datecodes_01.jpg\|Interior enclosure date-code wheels and material markings.		File:surge_APC_PRO7_1Z0222R02812_Insidetoppanel_datecodes_01.jpg\|Interior enclosure date-code wheels and material markings.
			File:surge_APC_PRO7_1Z0222R02812_board_bottom_01.jpg\|Solder side of the PRO7 printed circuit board.
	</gallery>		</gallery>

Line 169:		Line 181:
	== Related Articles ==		== Related Articles ==

	* [[~~Manufacturer~~]]		* [[APC]]
	* [[~~Product Family~~]]		* [[APC SurgeArrest Professional]]
	* [[Surge Protectors]]		* [[Surge Protectors]]
	* [[Collection Index]]		* [[Collection Index]]
			* [[APC SurgeArrest Recall (2013)]]


	[[Category:Surge Protectors]]		[[Category:Surge Protectors]]

PowerPig: Created page with "Brief introductory summary of the documented artifact. File:Main_Image.jpg|center|600px|Primary view of the documented artifact. == Overview == General description of the product, manufacturer, purpose, historical significance, and why this example is noteworthy. == Historical Context == Describe where the product fits within its manufacturer lineup, market segment, technological era, or product family. Examples:..."

2026-11-12T16:57:05Z

Created page with "Brief introductory summary of the documented artifact. <gallery mode="packed" heights="250"> File:Main_Image.jpg|center|600px|Primary view of the documented artifact. </gallery> == Overview == General description of the product, manufacturer, purpose, historical significance, and why this example is noteworthy. == Historical Context == Describe where the product fits within its manufacturer lineup, market segment, technological era, or product family. Examples:..."

New page

Brief introductory summary of the documented artifact.

<gallery mode="packed" heights="250">
File:Main_Image.jpg|center|600px|Primary view of the documented artifact.
</gallery>

== Overview ==

General description of the product, manufacturer, purpose, historical significance, and why this example is noteworthy.

== Historical Context ==

Describe where the product fits within its manufacturer lineup, market segment, technological era, or product family.

Examples:

* Consumer vs commercial product
* OEM vs retail product
* Relationship to recalls
* Introduction of new features
* Differences from previous generations

== Documented Example ==

* OldSurge ID: OS-XXXX
* Manufacturer:
* Model:
* Part Number:
* Serial Number:
* Manufacturing Date:

== Specifications ==

Short introductory paragraph explaining what makes the specifications noteworthy.

* Manufacturer: APC
* Product Family: SurgeArrest Professional
* Model: PRO7
* Device Type: Surge Protector
* Country of Origin: China

* Outlets: 7
* Protection:

* Length:
* Width:
* Height:

* Weight: 1 lb 15.7 oz (899 g)

* Power Cord Length:

* Plug Type:
* Plug Style:

* Cord Type:
* Conductors:
* UL File Number:
* CSA File Number:

== Notable Characteristics ==

* Characteristic 1
* Characteristic 2
* Characteristic 3

== Weight ==

The documented APC SurgeArrest Professional PRO7 weighed 1 lb 15.7 oz (899 g) prior to disassembly. Because this example underwent a complete destructive teardown for material analysis, the total weight serves as a baseline for comparison against the weight of individual recovered components including the power cord, enclosure, bus bars, printed circuit board, and suppression components.

<gallery mode="packed" heights="250">
File:surge_APC_PRO7_1Z0222R02812_Initial_weight_01.jpg|APC SurgeArrest Professional PRO7 prior to teardown, weighing 1 lb 15.7 oz.
</gallery>

== Physical Characteristics ==

Detailed description of enclosure design, indicators, outlets, mounting features, plugs, labels, markings, and overall construction.

== Photographs ==

<gallery mode="packed" heights="250">
File:surge_APC_PRO7_1Z0222R02812_SN_01.jpg|Internal APC identification label showing model PRO7 and serial number 1Z0222R02812.
</gallery>

== Date Codes ==

The interior enclosure contains two molded date wheels. One component is dated April 2002 while another is dated May 2002. These markings indicate manufacture of the plastic enclosure components during spring 2002.

An external APC identification label on the bottom identifies the unit as model PRO7 with serial number 1Z0222R02812 and indicates manufacture in China. The enclosure date codes are consistent with production during 2002. The '02' following the '1Z' in the serial number is indicative of manufacture in 2002 per the identification instructions in the APC Recall: [[APC SurgeArrest Recall (2013)]]

This example is noteworthy because its printed circuit board carries a 1997 copyright marking despite the enclosure and serial-number evidence indicating manufacture in 2002. A later December 2002 PRO7 documented by OldSurge instead contained a circuit board bearing a 2002 copyright marking, demonstrating that at least two PCB revisions were present within the PRO7 product family during 2002.

<gallery mode="packed" heights="250">
File:surge_APC_PRO7_1Z0222R02812_SN_01.jpg|Internal APC identification label showing model PRO7 and serial number 1Z0222R02812.
File:surge_APC_PRO7_1Z0222R02812_Insidetoppanel_datecodes_01.jpg|Interior enclosure date-code wheels and material markings.
</gallery>

== Condition Upon Acquisition ==

Description of condition as acquired.

<gallery mode="packed" heights="250">
File:BeforeCleaning_01.jpg|center|600px|Artifact before cleaning and documentation.
</gallery>

== Functional Testing ==

Description of operational testing, polarity testing, indicator operation, and test results.

<gallery mode="packed" heights="250">
File:Testing_01.jpg|Testing photograph.
</gallery>

== Teardown ==

Two molded date wheels are present on the inside of the enclosure. Both enclosure components are dated May 2002. These markings are consistent with production during mid-2002 and place the documented example approximately seven months earlier than the December 2002 example previously documented by OldSurge. ([[APC SurgeArrest Professional PRO7 (2Z0250P17876)]])

<gallery mode="packed" heights="250">
File:surge_APC_PRO7_1Z0222R02812_Insidetoppanel_datecodes_01.jpg|Interior enclosure date-code wheels and material markings.
</gallery>

== Comparison Notes ==

Compare against similar examples already documented by the archive.

Examples:

* Earlier and later revisions
* Different PCB generations
* Different levels of enclosure aging
* Weight differences
* Changes in manufacturing location

== Recall Information ==

If applicable.

* [[Recall Page]]

== Historical References ==

Historical advertisements, archived manufacturer literature, patents, magazine references, archived web captures, and period specifications.

<gallery mode="packed" heights="250">
File:HistoricalReference_01.png|center|700px|Historical reference.
</gallery>

== Notes ==

* Additional observations.
* Manufacturing details.
* Interesting findings.

== Related Articles ==

* [[Manufacturer]]
* [[Product Family]]
* [[Surge Protectors]]
* [[Collection Index]]

[[Category:Surge Protectors]]